Disclosure: Please support this website where content is created by humans not AI, and consider buying through our affiliate links. AI can’t ride bikes

The top 15 best 29 inch suspension forks in 2023

In this article I’m going to cover the best 29 inch suspension forks. To provide any semblance of coherence and not simply dump the entire premium lineup of Fox and RockShox in the same list, I decided to remove both extreme ends of the mountain bike spectrum from the equation.

It means no super lightweight XC and no pure dual-crown downhill forks are on this list. Instead I’ll offer a broad selection of both premium and budget-oriented forks meant for short-travel, light trail riding up to long-travel enduro riding.

I feel this selection covers the far majority of riders out there and provides me with the ability to provide information which is distinctive enough so you can make the best decision on what’s right for you and your budget. And I’ve written separate articles about XC and downhill forks as well, should you be interested in those.

The variety in this list is huge, both in price and adjustability and usage. The core differences are of course, materials used, stanchion width, damper and air spring technology with accompanying adjustability, and a smattering of miscellaneous features.

When described on their own, it’s pretty difficult to really come to a conclusion if a fork is right for you or simply too expensive and complex, paying for features you’re not going to use. I’ve tried to be extremely exhaustive in reviewing these forks and comparing them with similar alternatives.

You can find a table overview at the end of the article. Now, let’s head over to my list of the best 29 inch suspension forks. Enjoy.

RockShox Recon Silver RL

RockShox Recon Silver RL side view
RockShox Recon Silver RL front view
RockShox Recon Silver RL side view
fallback

RockShox Recon Silver RL (Rebound and Lockout) has a number of things going for it that set it apart from the pack of budget-friendly MTB forks.

The most obvious one is the price, which sits just above 200 USD depending on the travel you choose. This is very cheap for a 32mm stanchioned front suspension offering low-speed compression and rebound damping.

Because of its popularity and widespread appeal, RockShox has been smart enough to offer them in a broad range of travel, ranging from 100 up to 150mm of travel, for 27.5 and 29 inch wheels, 1.5 tapered and 1 1/8 straight steerers, various fork offsets, ample tire clearance, and Motion Control damper with Solo Air air spring.

The RockShox Motion Control damper is a budget-friendly option with minimal adjustability, offering an incredibly easy setup. It’s the oldest and most simple damping technology in RockShox lineup, with more complex variations either no longer available or being replaced by newer compression damping-technology.

The damper offers a single dial for open and closed low-speed compression damping. A full lockout can be enabled and completely closes the compression oil ports. The damper also offers a neat failsafe mechanism, which opens the compression valve cover on a locked out fork during a big hit, preventing possible damage to the internals and enabling fork travel again. It allows for a single big hit before a spring closes the valve cover again.

The SoloAir air spring simplifies suspension setup by being able to inflate both positive and negative air chambers using a single schrader valve. It means you always run the same pressure in both chambers. Although it is easier to set up, the fact that there’s no independent configuration of both air chambers does away with customisation of the initial travel characteristics, which translates to fine tuning small-bump sensitivity.

Since both chambers run the same pressure, it’s not possible to run a higher pressure in the negative air chamber, which is used for the downward stroke since it sits at the bottom of the air spring. This reduces the small-bump sensitivity obtainable with this type of air spring.

Simply looking at the specs and what you need to pay for this fork versus high-end ones, which are 2 to 4 times as expensive, it’s very easy indeed to see why this one also sells 2 to 4 times as much. Probably more than that.

RockShox 35 Gold RL

RockShox 35 Gold RL side view
RockShox 35 Gold RL front view
RockShox 35 Gold RL side view
fallback

The RockShox 35 Gold RL is an incredible fork for the money, because it’s the only top-end suspension sporting 35mm aluminum stanchions you’ll be able to buy. So if you’re looking for added stiffness for your trail or enduro bike, and want a highly tunable fork that is still affordable, this is one of the few if not the only option there is.

With a travel range between 100 and 160mm, and the ability to mount massive 2.8 inch tires, the fork covers almost the entire trail and enduro range. Those of you who want to ride with 170 or 180mm should look elsewhere.

With all other modern configuration options, like a BOOST axle width, 220mm rotor, and both 1.5 and 1.8 inch tapered steerers this fork will fit any modern mountain bike.

The Motion Control damper and DebonAir air spring are top-end suspension technology used for the budget-friendly lineup, allowing for compression damping, rebound adjustment and air spring ramp control with volume spacers.

RockShox Revelation RC

RockShox Revelation RC side view
RockShox Revelation RC front view
RockShox Revelation RC side view
fallback

The RockShox Revelation RC (Rebound and Compression) is based on the trail chassis of the more premium Pike. The difference between the two, besides a substantial drop in price, is both the damper and air spring technology used in this fork.

The fact it uses the same chassis means that you can upgrade to the more expensive damper and air spring used in the Pike, if you feel you’ve outgrown it. However, that’s not why you should buy this fork, because the combined price is much more expensive than buying the specific Pike in the first place.

It can be called a mid-tier mountain bike suspension with a Motion Control damper but an upgrade from the Recon with the DebonAir air spring. The biggest feature of the DebonAir air spring is the large negative air chamber sitting at the bottom of the spring.

Because of its larger adjustable volume it offers better configurability of small-bump sensitivity. And because there’s more air to compress it ramps up more linearly providing improved control and comfort while reducing the risk of bottoming out.

Because of its popularity, RockShox offers a wide variety of options and specifications similar to those of the Recon. Only the 9mm open dropout and lack of 1 1/8 steerer might be missing for those with older rigs.

What you see with products in general and front suspension specifically is that prices ramp up pretty quickly. RockShox needed to differentiate their lineup enough for people with varying budgets to be able to pick a fork they like, and the combination of features of this year’s Revelation is probably the best one of their entire lineup if you ask me.

It’s one of the best trail forks that can still be called budget-friendly, sitting well below the 500 dollar mark. It’s not as ridiculously cheap as the Recon but offers more riding versatility with 35mm stanchions and better adjustability. A well maintained Revelation can last you many years with foolproof performance, making this fork a financially sound investment in improving your riding experience.

RockShox Lyrik Ultimate

RockShox Lyrik Ultimate side view green
RockShox Lyrik Ultimate front view green
RockShox Lyrik Ultimate side view green
RockShox Lyrik Ultimate side view black

When you start comparing the big brands in front suspension, probably the most popular comparison is the one between RockShox Lyrik Ultimate and the Fox 36 Factory. Here’s my take on that comparison.

Although there are obvious similarities, there are a number of differences which might nudge you into the direction of one over the other. As for similarities, they both come with 140 to 160mm of travel, 15×110 axle width, 44mm rake, tapered 1.5 inch steerers and for both 27.5 and 29 wheel sizes.

The difference, besides the damper, is small as well. 35 versus 36 mm stanchions, 220 versus 230 max rotor size, 3.2 versus 2.6 inch max tire width, which you’re probably not going to need for normal trail riding, and a pretty similar weight and price as well. And you can leave your zip ties at home, since the Lyrik also features lower leg bleeders to remove pressure buildup caused by sucking air into them.

Then for a little bit of tech-talk about the damper. The RockShox Lyrik Ultimate features the Charger 3 damper, offering a 15-click dial for low-speed compression adjustment, within a 5-click dial for high-speed compression adjustment. This pretty extensive low- and high speed adjustment can be achieved without introducing additional harshness and loss of control.

The Charger 3 offers a 18-click rebound adjuster knob at the bottom of the damper, which means you cannot independently adjust high- and low-speed rebound. This improves ease of setup at the cost of adjustability. The damper does not use an expanding bladder (neither does Fox’ GRIP2), which is a more durable construction offering a lower risk of stiction and smoother fork action.

It also has more oil volume using a spring-backed floating piston to control oil flow, making it the plushest fork in RockShox’ catalog. Even more so, because both damper and air spring are offered with otherwise optional ButterCup suspension technology.

It reduces high-frequency vibrations otherwise known as “trail chatter”. This is the result of a fork not being responsive enough to handle small rocks and roots, directly translating the impacts to your body, causing fatigue, hand numbness, and even neck and shoulder issues on longer rides.

The buttercup on the damper side essentially holds two elastomers looking like small rubber pucks between a metal plate sitting within an aluminum housing, at the end of each shaft. The air spring side only has one of those pucks, with an o-ring sitting on the upper side. That’s because the air spring is much more effective on compression (downward stroke) not on the rebound (upward stroke).

They function as a suspension within a suspension, offering about 4mm of vertical compliance, taking out the smallest of trail irregularities, before the more advanced suspension technology is activated and reducing roughly (a claimed) 20% of trail chatter.

The first thing I thought as a guy having bikes with 30-year old suspension on it, was that it was nothing else than an elastomer with a fancy name slapped onto it. But it’s not, and it would be unfair to compare technologies decades apart. The only thing from a durability and financial perspective is that it definitely does add more components and complexity to the overall fork.

An air spring is made up of a shaft on which in this case a floating piston is installed, sitting between two seals. The Debonair+ air spring improves upon earlier models, by swapping out the plastic shaft for an aluminum one.

Larger volume negative air chambers for all three iterations is achieved by hollowing out the top hat of the piston. Just as with Fox’s Float EVOL air spring, the DebonAir+ larger negative air chamber offers a more linear spring curve and a reduced risk of bottoming out.

All skepticism aside, the suspension giant has outdone itself by creating the Lyrik Ultimate, which could indeed be the ultimate trail riding front suspension to dig deep into your wallet for.

RockShox Lyrik Select

RockShox Lyrik Select side view
RockShox Lyrik Select front view
RockShox Lyrik Select side view
fallback

The RockShox Lyrik Select is cheaper version of the Ultimate. Similar to other Ultimate/Select pairs, it swaps out the most expensive damper, in this case the Charger 3 with ButterCups, into a Charger RC (Rebound Compression) version. RockShox has been smart enough to make the drop in price exactly the same as well.

Recently RockShox has started messing up their naming conventions for damper technology, which makes it really difficult to know what’s what through the years. The Charger RC (Rebound Compression) is basically an older-style damper using bladder technology. This means a little bit less robust than the current Charger 3 damper, but is being offered for a much lower price.

You lose high-speed compression adjustability, which might not really make a difference for women and lighter riders. There are still a ton of travel options available, all the fork offsets you ever want to choose from, and the ability to mount a massive rotor without an adapter with a very burly front tire.

It’s a great platform for the average rider, since if you do want to move up in terms of specifications, the chassis supports compatibility with the better damper. Yet the lack of ButterCups combined with the initial force to get the fork moving, makes for a poppy fork that’s a bit harsher than both its more expensive brethren and the competition. On the flipside, you do get a fork that handles rough terrain at high speed excellent, and you can preload the suspension on jumps and in corners.

With so many of the specifications being the same, you’d argue that the cheaper Select would be a great value for people wanting to save a bit of cash. However, the upgrade ability is nice, but in the end will be more expensive than buying an Ultimate from the start. So unless you already have the better damper laying around and know how to install it, the feature is an expensive one at best.

RockShox ZEB Ultimate

RockShox ZEB Ultimate side view
RockShox ZEB Ultimate front view
RockShox ZEB Ultimate side view
RockShox ZEB Ultimate side view silver decals

The RockShox ZEB Ultimate is to the Lyrik Ultimate what the Fox 38 Factory is to the 36 Factory: basically a beefier model with 38mm stanchions and enduro-style travel options.

From 150mm all the way up to 180mm in 10mm increments, it means you can slap a shorter version of this heavy-duty fork on your long-travel trail bike, or choose this one over the 35mm stanchions of the Lyrik if you’re a heavier rider who’s looking for added stiffness on the roughest of trails.

Of all the brands offering front suspension, RockShox might feel the most controlled when going through its travel, gradually ramping up when needing to deal with the biggest hits. This ensures a smooth, controlled feeling while riding, with less need to throw your body around than you might be used to with earlier iterations of this fork, or other brands. Granted, the differences might only be noticeable when you’re riding different forks back to back and with a proper configuration, but it’s worth mentioning nonetheless.

I feel the ZEB is less racey and performance-oriented, lacking the high-speed rebound adjustment of the Fox 38. And unlike certain reviews might claim, more force is needed to get it started in its travel, making it more poppy and a tad more harsh on relative smooth trail conditions.

The Fox 38 progresses more lineary in the last stretches of its travel, making full use of it and maximising control when pointing the bike straight down a rock garden. This is not everybody’s cup of tea though, and the Zeb feels a bit less harsh because of it, sacrificing a bit of control for comfort on the mid-stroke for more average non-pro riding styles.

Though less adjustability in terms of clicks than the Fox 38, with 5 and 18 clicks of high- and low-speed compression consecutively, the changes between them feel distinct, especially when dialing-in the high-speed compression.

It’s always difficult to compare forks, and it’s just as difficult here. Besides ride quality, there’s also serviceability to take into account, and obviously price. Rockshox is almost allways the clear winner in the latter department, especially in regions other than North America. So that’s a big plus for this fork, which is still one of the most expensive ones in RockShox’ lineup.

In terms of longevity, I’m someone who looks beyond using a fork for just 3 years before deciding to sell his bike, and Fox’s Factory forks are both easier to service and of higher quality. And as yet, I can’t say anything about prolonged use of the new ButterCups.

By looking at the price and the ride characteristics of the fork I feel this is more the working man’s enduro and long-travel trail fork.

RockShox ZEB Select

RockShox ZEB Select side view
RockShox ZEB Select front view
RockShox ZEB Select side view
fallback

For the Select version of the ZEB, RockShox uses a Charger RC damper without ButterCups (which can still be had as a separate upgrade kit). So if you’re looking for an excellent enduro fork, that’s just a bit cheaper, and missing the lower-leg bleeders, will the Charger RC still do the job for you?

The obvious answer is “of course”. Don’t get me wrong, but the average rider doesn’t know how to correctly set up his or her suspension anyway, so a change in dampers is only going to affect people who know what they’re doing. But if you’re one of those people I would argue this fork is basically just as good as the Ultimate.

Recently RockShox has started messing up their naming conventions for damper technology, which makes it really difficult to know what’s what through the years. The Charger RC is basically an older-style damper using bladder technology. This means a little bit less robust than the current Charger 3 damper, but is being offered for a much lower price.

Again, just as with the Fox 38 Performance, you lose high-speed compression adjustability, which might not really make a difference for women and lighter riders. There are still a ton of travel options available, all the fork offsets you ever want to choose from, and the ability to mount a massive rotor without an adapter with a very burly front tire.

It’s a great platform for the average rider, since if you do want to move up in terms of specifications, the chassis supports compatibility with the better damper. Yet the lack of ButterCups combined with the initial force to get the fork moving, makes for a poppy fork that’s a bit harsher than both its more expensive brethren and the competition. On the flipside, you do get a fork that handles rough terrain at high speed excellent, and you can preload the suspension on jumps and in corners.

With so many of the specifications being the same, you’d argue that the cheaper Select would be a great value for people wanting to save a bit of cash. However, the upgrade ability is nice, but in the end will be more expensive than buying an Ultimate from the start. So unless you already have the better damper laying around and know how to install it, the feature is an expensive one at best.

Also Fox’ GRIP damper versus the GRIP2 seems to cater to two different audiences instead of one being the inferior option to the other. That doesn’t really seem to be the case with the Charger RC damper, which introduces harshness to a ride, which used to feel more plush with a similar yet older suspension.

Fox 34 Factory

Fox 34 Factory front view orange
Fox 34 Factory side view orange
Fox 34 Factory side view orange
Fox 34 Factory front view black

Though they might have very similar looks and even share the same name the Fox 34 Factory is still a very different fork than the Fox 34 Step-Cast Factory.

The latter fork is very XC-oriented, with a focus on weight reduction (Step-Cast), tire clearance in line with the popular 2.25 width of cross country tires, up to 120mm of travel, and a FIT4 damper with optional lockout for climbing and sprinting.

The Fox 34 Factory sits much more squarely into trail territory by moving the max travel to 140mm and offering the highly adjustable GRIP2 damper, which has both high- an low speed compression adjustment (instead of only low speed). The option to dial in your compression adjustment for both high- and low speed starts to make more sense if there’s more travel to work with, hence you don’t see this damper on XC forks.

With the GRIP2 damper the Fox 34 is the first four-way adjustable front suspension in their lineup. Besides a little weight penalty over the FIT4 damper, and the fact its a bladder-less cartridge damper that holds more oil, by far the biggest difference between the two dampers is the amount of adjustability. The GRIP2 goes all-out in this respect with a 16-click dial for low-speed compression adjustment, within a 9-click dial for high-speed compression adjustment.

That immediately showcases the target audiences for this fork, since both damper options are available with the Fox 34 Factory. The 3-position lever to quickly configure your compression is incredibly easy to setup for every rider out there, and is still a fantastic option for this fork. The GRIP2 damper is the better option for quickly traversing rough terrain, and is the core reason why it makes its appearance on a trail fork.

The FLOAT EVOL (Extra Volume) air spring has a larger negative air chamber, besides the standard positive one. Aside from supporting your weight in a neutral position, the air spring offers a more linear spring curve that’s supple off the top on small bumps yet still has the support to resist bottoming out on those big hits.

The size of the positive air chamber can still be reduced as you’re used to with air volume spacers, without affecting the functionality of the negative chamber. By reducing the air volume of the positive air chamber you make the fork act more progressive, resisting bottoming out more for those of you who like to ride hard and aggressive.

I’ve already meantioned this is a much more trail-worthy partner than the Step-Cast. Besides the different damper, the Fox 34 Factory has a max tire clearance of 2.6 inches, which covers the entire range of trail tires and probably enduro as well. The orange version only comes with 140mm of travel, while the black one is also available in a downcountry-ish 130mm.

Fox 34 Performance Elite

Fox 34 Performance Elite front view
Fox 34 Performance Elite side view
Fox 34 Performance Elite side view
fallback

The Fox 34 Performance Elite is the non-Kashima coated version of the Fox 34 Factory.

All premium front suspension has anodized stanchions to protect them, increasing its longevity and durability, and offer low-stiction, smooth performance. The Kashima coat enhances both by smoothing out the microscopically rough bumps in the anodization layer even more with the characteristic bronze coating.

As far as damper options are concerned there’s only one, which is the FIT4, which can adjust the low-speed compression in a 130mm travel fork. The entire package makes this a somewhat more affordable option for endurance XC and/or short-travel light trail bikes.

Fox 34 Performance

Fox 34 Performance front view
Fox 34 Performance side view
Fox 34 Performance side view
fallback

As far as entry-level goes with Fox the Fox 34 Performance is the most affordable option with 34mm stanchions, coming with 140mm of travel and the GRIP damper.

This damper further simplifies the setup. The GRIP damper is a compression-damping technology that offers 3 on-the-fly settings equating Open (no damping), and Firm damping configurations with infinite adjustment in between 3 detents. The settings can be configured with a single dial.

Furthermore it offers a 10-click rebound adjuster knob at the bottom of the damper, which means you cannot independently adjust high- and low-speed rebound. This improves ease of setup at the cost of adjustability.

With 3 settings including dedents in between, there’s still a ton of low-speed compression adjustment this fork offers. And you might argue that, for obvious reasons, a well configured GRIP2 damper improves support and stability for your mid-stroke and your big hits.

But that’s emphasizing the willingness and ability to configure your damper correctly. This much more straightforward approach to front suspension adjustability will probably suit more riders.

Fox 36 Factory

Fox 36 Factory front view orange
Fox 36 Factory side view orange
Fox 36 Factory side view orange
Fox 36 Factory front view black

Probably every “best of” list concerning trail suspension has this one on its list, which is the Fox 36 Factory. And with a travel sitting in between 150 and 160mm for the black version, and 160mm for the glossy orange one, it has trail ridding written all over it.

Max rotors of 230mm, tire clearance up to 2.8 inch, and the GRIP2 option for both 29 and 27.5 wheels, means you get all the adjustment you’re ever going to need to shred basically any kind of trail. And depending on your bike and weight, this fork can also be used for more enduro-style adventuring.

Just as the Fox 34 Factory, this one with 36mm stanchions still offers the FIT4 damper as well. The FIT4 is the top-of-the-line damper for Fox’s XC lineup, so one is not really better than the other. The difference resides in its usage, and where adjustability of high-speed compression starts to make more sense.

A 160mm travel trail bike can definitely be used on hard-hitting terrain where you want to maximise your control and finetune the mid- and end stroke of your compression. It’s not to say that you can only do that with the GRIP2 damper, you can just do it in a more fine-grained way.

But you not only have the damper side to contend with, there’s also the FLOAT EVOL air spring with independently adjustable positive and negative air chambers. And on top of that, you can change the volume of the air chamber with volume spacers to change the linearity of the spring curve. Or rather, in layman’s terms, how fast the fork will stiffen when going through its travel. The less air volume the quicker it stiffens.

I guess all I’m trying to say here is that you can write an encyclopedia about the amount of adjustability you can tinker with the top-end version of this fork. It’s just mind-boggling. So to end this little review, that’s both its strength and maybe its downside.

The Factory version of the 36 is nothing short of absolutely awesome. It’s one of the very best trail forks ever made, and you can play with the configuration to your heart’s content. The specifications besides the adjustability of the fork are outstanding and will support any configuration of trail bike. It’s up to you whether you want to go for the FIT4 versus the GRIP2.

Fox 36 Performance Elite

Fox 36 Performance Elite front view
Fox 36 Performance Elite side view
Fox 36 Performance Elite side view
fallback

It’s very interested to see that where the Performance Elite for the Fox 34 favors the FIT4 damper over the GRIP2, it’s just the other way around for the Fox 36 Performance Elite. In this case, there’s only the GRIP2 damper option. All other options (except for Kashima coating and additional rake options) are exactly the same.

What we can learn from that is what I already concluded earlier. High-speed compression adjustability, something which only the GRIP2 offers, starts to make more sense with longer travel forks. In this case the Fox 36 Performance Elite only comes in a 160mm version.

And just to reiterate. The GRIP2 damper has a total of 25 settings to configure, divided into 16 clicks for low-speed compression adjustment, and 9 clicksl for high-speed compression adjustment. And if you’re willing to spend the kind of money for this type of fork, you’re also somebody who’s willing to spend the extra time setting it up correctly.

Whether those assumptions from Fox’ sales department is true is up to you of course.

Marzocchi Bomber Z2

Marzocchi Bomber Z2 front view black
Marzocchi Bomber Z2 side view black
Marzocchi Bomber Z2 front view red
Marzocchi Bomber Z2 side view red

The Marzocchi Bomber Z2 shares the same air spring as the Fox 34 Rhythm, which means you also get the same adjustable travel within a single front suspension, from 100mm up to 150 of travel.

Being able to use high-grade components from its mother company pays dividends, creating one of the best-performing forks in its price category for budget-minded people. The Marzocchi Bomber Z2 is one of the best examples where you can obtain a premium riding experience without paying top dollar simply because the fork doesn’t bear the name Fox or RockShox.

The FLOAT air spring sits in Fox’s top-of-the-line XC and trail forks and can be found here as well. It supports installing volume spacers to reduce the size of the positive air chamber for increased progressiveness and bottoming out resistance. Since the volume spacers do nothing with the negative air chamber (used for the downward stroke), small bump sensitivity is minimally impacted.

The Rail damper is where the biggest difference sits. It’s a semi open-bath construction, which means the containing cartridge is removed and the internals are sitting in the shaft of the stanchion, which reduces complexity and costs. It arguably is a design that needs less maintenance as well, because of the larger volume to hold oil and the lack of a bladder, which is a delicate part of the damper. An increase in weight is the downside.

Whatever the design, the heavy Z2 does smooth out the trail as none of its competition does, reducing trail chatter to an absolute minimum. And the easy adjustability of both external damper and air spring, as well as the ability to reduce air volume enables you to finetune the entire length of travel to your specific setup, just as you would with any of the most expensive forks out there.

And they come in a glossy red finish as well, what more could you ask for?

Manitou Mezzer Pro

Manitou Mezzer Pro side view
Manitou Mezzer Pro front view
Manitou Mezzer Expert side view
fallback

The Manitou Mezzer Pro deserves its place on this list, simply because it’s a fantastic brand making a fantastic-looking, hard-htting yet very versatile, 37mm stanchioned fork.

When talking front suspension, all the attention goes to Fox and RockShox, leaving all the other brands to work harder to get the same kind of recognition. So the big question is of course whether or not it measures up to the Fox 38 and Zeb Ultimate.

Simply looking at the specs, it does. Apart from the 37mm stanchions, the fork is offered with 140 up to 180mm of travel, so it can take plenty of abuse. It has all rake options you’d want, standard 15x110mm axle width, able to hold a 223mm rotor, and featuring the MC² damper and Dorado Air with IVA volume spacers.

I don’t usually care all that much about weight, especially not in the enduro and downhill category, but the weight of this fork at 2032 is markedly lighter than both the Zeb Ultimate and Fox 38 Factory.

A lot can be said about brands using proprietary marketing slang to denote ride characteristics of forks. Manitou coined the term IRT (Infinite Rate Tune) volume adjuster to be able to reduce air volume in the positive air chamber of the air spring with the need to open up the fork and add volume spacers. While maybe not a game changer, it’s incredibly user-friendly to finetune mid-stroke support with a higher degree of adjustability on the fly.

In less technical terms it means that for the majority of your ride (not to slow, not too hard) you can expertly dial in your ride preferences to get the most support possible from a fork within this category, with a smooth and supple ride as a result.

The Multi Compression Control (MC²) damper provides an independently adjustable high-speed compression circuit which combines with an independently adjustable low-speed circuit to offer an externally adjustable, on the fly high-speed blowoff threshold and tuning range. It offers 10 clicks of low-speed compression adjustment, and 4 clicks of high-speed compression adjustment.

Furthermore the fork has a 10-click rebound adjuster. And all MC² dampers include the hydraulic bottom out (HBO) system, which kicks in the final millimeters of travel. It’s not as nuanced and sophisticated as the most premium options out there, lacking sensitivity to smooth out the trail chatter.

The fork shines in its versatility with a starting travel of 140mm attainable without changing the air spring. With a relatively easy DIY job, you can add a number of travel spacers to get to the desired travel effectively. Maybe not as versatile for true enduro riding, the fork offers a wide application of riding styles with a user-friendly setup and incredible plushness for probably the far majority of riders.

DVO Diamond D1

DVO Diamond D1 side view black
DVO Diamond D1 side view green
DVO Diamond D1 side view blue
fallback

The DVO Diamond D1 is a rare beast on the trail. It’s easier to spot a Lefty than someone riding DVO suspension. That’s a shame, because the front suspension with 35mm stanchions is well-suited for the more tech-oriented DIY tuners.

Though not as well-suited to deal with true enduro and downhill riding, more flowy trails with the occasional rough stuff thrown in between is no problem at all for the fork, which comes with 140 to 170mm of travel, depending on your wheel size.

The air spring side features a negative spring you can preload to set for small-bump sensitivity using an allen key. Since it works besides support for mid- and end stroke, it’s a very easy way to get a very plush feel for the initial part of the travel. At a certain point in your travel it opens up for mid-stroke support you control with your standard air pressure. It’s an intuitive design that’s fun and easy to tinker with, and to create a pretty distinctive setup which’ll suit your trail riding characteristics.

Where the Manitou Mezzer Pro has external mid-stroke adjustability with the IRT volume adjuster, the DVO Diamond D1 focuses more on the initial part of the travel. Which makes sense since this fork sits more squarely into trail riding territory.

Specifications 29 inch suspension forks

Name
Price
Wheel size
Travel
Stanchion
Rake
Axle
Rotor size
Max tire width
Damper
Air spring
Steerer
Color
Buy at Amazon
RockShox Recon Silver RL
268 USD
27.5″, 29″
100mm, 120mm, 130mm, 140mm, 150mm
32mm straight wall steel
37mm, 42mm, 46mm (27.5″)
42mm, 46mm, 51mm (29″)
15x100mm, 15x110mm BOOST
9x100mm QR
160-220mm
2.45″, 2.8″
Motion Control
Solo Air
1.125S, 1.5T
gloss black, matte black
RockShox 35 Gold RL
483 USD
27.5″, 29″
100mm, 120mm, 130mm, 140mm, 150mm, 160mm
35mm tapered wall aluminum
37mm, 44mm (27.5″)
44mm, 51mm (29″)
15x110mm BOOST
180-220mm
2.8″
Motion Control
DebonAir
1.5T, 1.8T
gloss black, matte black
RockShox Revelation RC
537 USD
27.5″, 29″
120mm, 130mm, 140mm, 150mm, 160mm
35mm tapered wall aluminum
37mm, 46mm (27.5″)
42mm, 51mm (29″)
15x110mm BOOST
180-220mm
2.8″
Motion Control
DebonAir
1.5T
gloss black, matte black
RockShox Lyrik Ultimate
1107 USD
27.5″, 29″
140mm, 150mm, 160mm
35mm tapered wall aluminum
37mm, 44mm (27.5″)
44mm (29″)
15x110mm Maxle Stealth
180-220mm
3.2″
Charger 3 w. ButterCup
DebonAir+ w. ButterCup
1.5T
gloss black, meadow green
RockShox Lyrik Select
843 USD
27.5″, 29″
140mm, 150mm, 160mm
35mm tapered wall aluminum
37mm, 44mm (27.5″)
44mm (29″)
15x110mm Maxle Stealth
180-220mm
3.2″
Charger RC
DebonAir+
1.5T
gloss black, matte black
RockShox ZEB Ultimate
1159 USD
27.5″, 29″
150mm, 160mm, 170mm, 180mm, 190mm
38mm aluminum
38mm, 44mm (27.5″)
44mm, 51mm (29″)
15x110mm Maxle Stealth
200-220mm
3.2″
Charger 3 w. ButterCup
DebonAir+ w. ButterCup
1.5T
gloss black, matte gray
RockShox ZEB Select
896 USD
27.5″, 29″
150mm, 160mm, 170mm, 180mm, 190mm
38mm aluminum
38mm, 44mm (27.5″)
44mm, 51mm (29″)
15x110mm Maxle Stealth
200-220mm
3.2″
Charger RC
DebonAir+
1.5T, 1.8T
gloss black, matte black
Fox 34 Factory
949 USD
29″
140mm (orange)
130mm, 140mm (black)
34mm 7000 series aluminum w. Kashima coating
44mm (orange)
44mm, 51mm (black)
15x110mm (QR orange),
15x110mm (QR/Kabolt black)
180-203mm
2.6″
GRIP2, FIT4
FLOAT EVOL
1.5T
gloss orange, gloss black
Fox 34 Performance Elite
869 USD
29″
130mm
34mm 7000 series aluminum
44mm
15x110mm QR
180-203mm
2.6″
FIT4
FLOAT EVOL
1.5T
matte black
Fox 34 Performance
749 USD
29″
140mm
34mm 7000 series aluminum
44mm
15x110mm QR
180-203mm
2.6″
GRIP
FLOAT EVOL
1.5T
matte black
Fox 36 Factory
1139 USD
27.5″, 29″
160mm (orange)
150mm, 160mm (black)
36mm 7000 series aluminum w. Kashima coating
44mm (orange)
37mm, 44mm, 51mm (black)
15x110mm KaboltX
180-230mm
2.8″
GRIP2, FIT4
FLOAT EVOL
1.5T
gloss orange, gloss black
Fox 36 Performance Elite
1049 USD
27.5″, 29″
160mm
36mm 7000 series aluminum
44mm
15x110mm QR
180-230mm
2.8″
GRIP2
FLOAT EVOL
1.5T
matte black
Marzocchi Bomber Z2
519 USD
27.5″, 29″
140mm, 150mm (27.5″)
100mm, 120mm, 130mm (29″)
34mm
44mm (27.5″)
44mm, 51mm (29″)
15x110mm QR
RAIL
FLOAT
matte black
Manitou Mezzer Pro
1100 USD
27.5″, 29″
140-180mm
37mm 7000 series aluminum
37mm, 44mm (27.5″)
44mm, 51mm (29″)
15x110mm Hexlock
180-223mm
2.9″
MC²
Dorado Air w. IVA
1.5T
gloss black
DVO Diamond D1
749.00 – 1024.00 USD
27.5″, 29″
150-170mm (27.5″)
140-160mm (29″)
35mm tapered wall aluminum
37mm, 44mm (27.5″)
44mm, 51mm (29″)
15x110mm BOOST
160mm
3″ (27.5″)
2.5″ (29″)
D1
black, blue, green
bio vanseijen

Johan van Seijen

FoundeR Restoration.bike

Johan van Seijen is the founder of restoration.bike. His passion for cycling in general, and restoring older bikes turned into a website to share his knowledge with a broader audience. Starting out on his father’s road bike and riding classics as the Amstel Gold Race and Liege Bastogne Liege he has shifted his attention to trail, XC, and gravel riding since. No matter how much he loves writing about everything related to cycling, nothing beats actually using his ever-expanding bicycle collection.

You might also like